Combination Tool Set
DeWalt 9 Piece SAE Combination Wrench Set
- Stamped hashmark pattern on wrench handle provides added grip points.
- Longer panel design gives more torque during use.
- Full Polish Chrome
- 13 degree offset box end for knuckle clearance
- Sizes stamped twice on both sides of wrench handle for easier size identification
- 15 degree offset open end allows an increased range of arc swing in tight spaces
- DirectTorque™ Technology helps prevent rounding of fasteners
- Stamped markings provide permanent visibility and prevents wear over time.
Stanley 26" 5-Drawer Tool Chest and Cabinet Combination
- Full-extension ball-bearing drawer slides for smooth operation
- 5 30 lbs. load capacity drawers
- 4 3x1 casters with two lock and swivel
- 3 sliding trays for easy small-parts organization
- All-steel construction
DeWalt 10 Piece Combination Wrench Set Metric (10-19M...
At first glance DEWALT® Combination Wrenches may look like ordinary combination wrenches, but looks can be deceiving. These professional-grade wrenches boast innovative features not found on standard wrenches, including an anti-slip design that locks onto the fastener to virtually eliminate knuckle-busting slippage, grips with 400 percent more power than other wrenches, and knurled panel rings that provide a non-slip gripping surface.
DEWALT® Combination Wrenches also feature a slim head for use in narrow crevices and tight spaces, and 15-degree offset handle that provides extra clearance for your hand. They’re available in a 10-piece SAE set that includes wrenches ranging from 3/8 inch to 15/16 inch, and in a 10-piece metric set that contains wrenches from 10mm to 19mm. All DEWALT® Combination Wrenches are backed by a full lifetime warranty.
- Anti-slip Design delivers 400% more gripping power to reduce fastener damage and provides extra torque
- Long Panel Forging for extra reach and leverage
- Knurled Panel Rings provide a non-slip gripping surface.
- Lifetime Warranty
Stanley 10-Piece Combination Wrench Set
- 10-piece wrench:
- 1/4 in. Combination Wrench
- 5/16 in. Combination Wrench
- 3/8 in. Combination Wrench
- 7/16 in. Combination Wrench
- 1/2 in. Combination Wrench
- 9/16 in. Combination Wrench
- 5/8 in. Combination Wrench
- 11/16 in. Combination Wrench
- 11/32 in. Combination Wrench
- 3/4 in. Combination Wrench
- 12 point box end which prevents fastener damage and allows for higher torque
- Backed by limited lifetime warranty
- Meets or Exceeds ANSI Specs
Stanley 11 pc Combination Wrench Set (SAE)
- The box end of the STANLEY (R) Combination wrench employs the Max-Drive (TM) system, which allows the box end to contact the fastener away from the corner
- This system allows 15 percent more torque to be applied to the fastener and helps reduce fastener rounding
- Stanley wrenches are designed to meet or exceed ANSI specifications
- 11 piece set
- 3/8 in. to 1 in. wrenches
- Combination Wrenches
- Roll up storage mat
Craftsman 7 pc. Metric Locking Flex Ratcheting Combina...
- 7 piece metric locking flex ratcheting combination wrenches are designed to be used in tight spaces
- Get powerful torque with as little as 5 degrees of arc
- 180 degree locking head rotation allows you to work around corners
- Full polish design cleans easily
- Comfortable grip makes the job a little easier
- Rugged alloy steel ensures durability
- Extended handles increase leverage
- Clear markings make finding the size you need simple
- Includes 8mm, 10mm, 12mm, 13mm, 15mm, 17mm and 19mm
Craftsman 8 pc. Reversible Ratcheting Combination Inch...
- 8 piece reversible ratcheting combination inch wrench set is a solid addition to your garage
- Easily grabs with the open end
- Smooth rotating box ensures the job gets done easily
- Ratcheting box end eliminates the need to lift between turns for added speed
- Single-hand reversing lever allows users to switch direction easily
- 12 degree offset box end allows for easy knuckle clearance
- Fine tooth ratcheting action with 72 teeth turns faster with only a 5 degree arc
- Includes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4
Craftsman 15/16" Combination 6 Point Wrench
- 15/16 combination wrench is an essential tool in your garage
- Forged from alloy steel for durability
- Heat treated, oil quenched and tempered design offers uniform hardness
- Nickel chrome plating resists rust and corrosion
- Designed to wipe clean easily
Craftsman 10 Pc. Combination Wrench Set
- 10-piece set includes: 5/16, 3/8, 7/16, 1/2, 5/8, 10mm, 12mm, 13mm, 14mm and 15mm
- 12-point box-end arrangement is specially designed to work in challenging spaces
- Tough steel design is easy to handle and clean
- Etched markings allow you to grab and go
- Pouch rolls up neatly while delivering serious organization
Craftsman 10 Pc. Midget Combination Wrench Set
- Set includes: 5/32, 3/16, 13/64, 7/32, 15/64, 1/4, 9/32, 5/16, 3/8, 7/16 wrenches
- Rugged alloyed steel construction for long life
- Offset box end improves control and protects knuckles
- Open end delivers quick grab
- Smooth polished finish cleans up fast
- Stamped size markings won’t wear off
- Include pouch for organization
Craftsman 5/16" Combination 12 Point Wrench
- 5/16 combination wrench delivers torque and strength you need to complete your toughest jobs
- Forged from tough alloy steel, this wrench ensures durability
- Heat treated, oil quenched and tempered for uniform hardness
- Nickel-chrome plated design resists rust and corrosion for longevity
- 12 points of contact ensure maximum torque
Craftsman 19mm Universal Wrench
- 19mm universal wrench is designed for any job
- Reinforced spline box end grabs 5 various kinds of fasteners including 4, 6 and 12 sided, spline and external Torx
- High tensile strength alloy steel ensures durability
- Clearly marked size markings are convenient
- 15 degree offset head stops knuckle grinding
- Smooth and protective finish prevents rust while reducing friction
- Offers a balance of grip and speed
- Combines adaptable universal box end with fast turning of an open end
Craftsman 18mm Universal Wrench
- Spline geometry works with 4, 6, 12 point, spline, external Torx and rounded standard fasteners
- 15° offset head puts an end to knuckle grinding turns
- Smooth and protective finishes prevent rust while reducing friction
- Tough steel build delivers tons of torque
Craftsman 1/4 INCH UNIVERSAL WRENCH
- Craftsman 1/4-Inch Universal Combination Wrench
- Spline geometry works with 4, 6, 12 point, spline, external Torx and rounded standard fasteners
- 15-degree offset head puts an end to knuckle grinding turns
- Smooth and protective finishes prevent rust while reducing friction
- Tough steel build delivers tons of torque
- Protected by a lifetime warranty